Pulsar 3P

Supplier: 

The h/p/cosmos pulsar® 3p features above all a 3-phase power connection with 3 x 400 volts AC in addition to the larger running surface of 190 x 65 cm (74.8 x 25.59“) and the built-in reverse belt rotation for downhill training. Diagnostics for heavier athletes and many special applications are therefore possible. As part of sprint and speed tests speeds of up to 40 km/h (standard, optional 45 km/h ~ 28 mph ) are possible. Here it is all about the speed stability and not just the speed of the belt

running machine :          pulsar® 3p

manufacturer:                h/p/cosmos sports & medical gmbh / Germany

order number:               cos30004va04

applications:                  endurance training walking and running, stress device for performance testing, gait analysis and gait training

control:                             via UserTerminal MCU5 with keyboard and display, integrated interface or via optional remote control

running surface:              L: 190 cm (6ft 2.8") B: 65 cm (2ft 1.6") special sizes available at extra charge access height: 23 cm (9.06") - shock load reduction for the joints - running belt with slip resistant surface -                                                        reinforced running belt with profiled surface, 5 mm thick - max. permissible load: 200 kg (440 Ibs) - optional 300 kg (660 lbs) at extra charge

speed range:                  0...40.0 km/h (0...11.1 m/s) (0...24.8 mph) special speed available at extra charge: 0...10 km/h (0…6.2 mph) 0...45 km/h (0…27.8 mph)

acceleration:                   7 acceleration / deceleration levels between 131 s and 3 s from 0 to max. or from max. to 0; equals 0.084… 3.70 m/s² programmable via para control PC software

elevation:                          -25.0 %...+25.0 % (-14.0°...014.0°) motorized adjustment, (up to -25 % when using reverse belt rotation)

running direction:              switch for reversing running belt direction as standard, max. permissible reverse speed 5 km/h (3.1 mph) if no safety-harness with fall-stop prevention system is used

motor system:                   4.3 kW (5.8 PS) 3-phase AC motor, maintenance free and brushless; 20 years warranty on main drive motor

power transmission:        frequency inverter, poly-V-belt, very quiet operation

safety systems:                  CE0123; medical device directive 93/42/EEC + 2007/47/EC; MDD; machinery directive 2006/42/EC; IEC 60601-1; EN 60601-1-2 (EMC approved); EN 60601-1-6; EN 62304; EN                                                         62353; ISO 20957-1; EN 957-6; EN 14971; EN ISO 13485; emergency-off safety stop switch (mushroom push button for drive system power-off); emergency stop switch (safety                                                            lanyard with actuator, pull cord and clip); potential equalization bolt; transformer for potential-isolation from the mains.

degree of protection:           appliance class I M / type B R / IP 20

classification:                          medical device risk class IIb according to MDD, active therapeutic medical device and active diagnostic medical device

usage class:                              S, I according to ISO 20957-1

accuracy class:                        A (high accuracy) according to EN 957-6

earth leakage current < 0.2 mA

ambient condition:                  temperature: +10…+40 °C (-30…+50 °C on request) humidity: 30…70 % (up to 100 % on request) air pressure: 700…1060 hPa; 3,000 m (~10,000 ft) max. altitude without                                                                    pressurization

display (resolutions):               6 LCD displays, 4 LEDs for operation modes, 20 LEDs for display of units & profile no, steps, etc. speed (0.1 km/h or m/s or m/min or mph), time (00:00) in hours, minutes &                                                                    seconds, elevation (0.1 % or degrees) distance (1 m...999.9 km or miles), METS (1 MET) program step/number, energy (1 kJ/kcal), fitness index (1) power (1 Watt), heart rate (1                                                             bpm / beat per minute)

heart rate monitoring :               POLAR W.I.N.D: coded, wireless transmitter; ECG-accurate measurement; automatic control of speed and elevation according to programmed target heart rate ("cardio mode")

digital interface:                          2 x RS 232 com1 & com2 with 9600 bps: incl. PC-protocol, h/p/cosmos coscom® & printer protocol serial. option extra charge: USB-RS232-converter; com3 with 115200 bps

programs:                                     42 programs / profiles

Support & Order: